TR100-THC-G
Details
Details
Wall Module with Temperature setpoint: Temperature, Humidity and CO2 sensors
****
Product data sheet
****
Protocols and compatibility
Modbus™ RTU, BACnet™ MS/TP, and Sylk™ enable future firmware updates and enhanced functionality. The Honeywell TR100 works with Honeywell and third‑party controllers and is not based on proprietary protocols. Its capacitive touchscreen interface allows easy configuration with minimal installation training, and embedded help screens make setup intuitive.
Part Numbers Description
Part Numbers
| Part Number | Sensors | Communication Protocol | Power |
|---|---|---|---|
| TR100-T-G | Temperature | Modbus™ RTU, BACnet™ MS/TP, Sylk™ | 24 VAC/VDC or Sylk™ |
| TR100-TH-G | Temperature, Humidity | Modbus™ RTU, BACnet™ MS/TP, Sylk™ | 24 VAC/VDC or Sylk™ |
| TR100-THC-G | Temperature, Humidity and CO₂ | Modbus™ RTU, BACnet™ MS/TP, Sylk™ | 24 VAC/VDC or Sylk™ |
| Part Number | Description |
|---|---|
| TRTC-DECOPLATE-1 | TR100 deco plate. |
| Parameter | Specification |
|---|---|
| Dimension (L × W × H) | 3.93 × 1.02 × 4.47 inches (100 × 26 × 113 mm) |
| Weight | 0.52 lbs. (238 grams) |
TR100 Wall Module — Technical Specification
Power Characteristics
| Parameter | Specification |
|---|---|
| Power Supply | Rated Voltage: 24 VAC 50/60 Hz Working Voltage Range: (1) 24 VAC 50/60 Hz, 20–30 VAC (2) 24 VDC, 20–30 VDC (3) Power over Sylk™ communication |
| Power Consumption (Display ON) | Max. 3.2 VA @ 24 VAC (0.8–0.9 W @ 24 VDC/Sylk™M) |
| Supported Devices on Sylk™M | Sylk™ Powered: Emulate TR42/TR7x series, support max (1) device. Connect external 24VAC/VDC supply if multi-devices work under one Sylk bus. |
Display
| Parameter | Specification |
|---|---|
| Display Type | 16 BPP TFT display with CTP |
| Resolution | 320 × 240 pixels |
| Active Display Area | 2.4" diagonally |
| Backlight | LCD (Dimmable) |
| LED Color Ring | Blue (Cooling), Orange (Heating) |
Onboard Sensor
| Parameter | Specification | Details |
|---|---|---|
| Temperature | Resolution | 1 ºF (0.5 ℃) |
| Accuracy | ±1.5 ºF (0.8 ℃) from 32–122 ºF (0–50 °C) ±0.6 ºF (0.35 ℃) with 95% confidence from 60–85 ºF (15–30 °C) | |
| Humidity | Resolution | 1 % RH |
| Accuracy | ±3 % RH from 20–80% RH @ 25 ℃ | |
| CO₂ | Measure Range | 400–5000 ppm |
| Sensor Output Resolution | 1 ppm | |
| Accuracy | ±(50 ppm ± 2.5% reading) @ 400–1000 ppm | |
| ±(50 ppm ± 3% reading) @ 1001–2000 ppm | ||
| ±(40 ppm ± 5% reading) @ 2001–5000 ppm |
Electrical Characteristics
| Parameter | Specification |
|---|---|
| Rated Impulse Voltage | 500 V |
| Construction of Control | Independently Mounted Control |
| Operation Method | Type 1 Action |
| Pollution Degree | 2 |
| Purpose of Control | Operating Control |
Wire Specification
| Parameter | Specification |
|---|---|
| Wire Gauge | 14–26 AWG (0.2–1.5 mm² solid/stranded, max 2.5 mm² solid) |
| Wire Type | Copper |
Operating Environment
| Parameter | Specification |
|---|---|
| Ambient Operating Temperature | 32–122 ºF (0–50 °C) |
| Ambient Operating Humidity | 10–90 % RH (non-condensing) |
| Storage Temperature | -40–150 ºF (-40–65.5 °C) |
| Protection Class | IP20 |
Communication
| Parameter | Specification |
|---|---|
| Sylk™ | Honeywell Sylk™ |
| BACnet™ MS/TP | 9.6, 19.2, 38.4, 57.6, 76.8, 115.2 Kbps |
| Modbus™ RTU | 0.3–115.2 Kbps |
Controller Compatibility
The TR100 is open protocol and connects to controllers using BACnet™ MS/TP, Modbus™ RTU, and Sylk™.
BACnet™ MS/TP and Modbus™ RTU: All Honeywell and third-party controllers supporting standard communications.
Sylk™ Optimizer Supervisor: Spyder classic, Stryker, CIPer Model 30, Optimizer Unitary
Comfort Point™ Open (CPO): CPO-Rxx, CPO-VAV2A, Optimizer Unitary, Optimizer VAV
TR100 Wall Module — Replaceability & Feature Comparison
Replaceability
TR42, TR42-H, TR42-CO₂, TR42-H-CO₂, TR75, TR75-H, TR71, TR71-H, TR71-TH, TR120, TR120-H, TR120-TH wall modules wired to controllers can be directly replaced by TR100-T-G, TR100-TH-G, or TR100-THC-G. Simply remove the old wall module and install the new one (including new backplate). Backplate sizes and mounting holes are identical.
The TR100 accepts TR42 or TR75 file configurations (proxy file) downloaded from the existing controller and provides the same configuration and functionality with a modern touchscreen interface. TR100 modules can directly accept TR42 or TR75 application downloads without modifications in the controller or engineering tool.
TR100 feature comparison
| Feature | TR75 emulation | TR42 emulation | TR100 (BACnet™ MS/TP / Modbus™ RTU) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TR100-T-G | TR100-TH-G | TR120 | TR75 | TR71 | TR100-T-G | TR100-TH-G | TR100-THC-G | TR42 | TR100-T-G | TR100-TH-G | TR100-THC-G | |
| Color touch | ☒ | ☒ | ☒ | − | − | ☒ | ☒ | ☒ | − | ☒ | ☒ | ☒ |
| Usability/display | Swipe & touch | Swipe & touch | Touch | Predefined buttons | Predefined buttons | Swipe & touch | Swipe & touch | Swipe & touch | Predefined buttons | Swipe & touch | Swipe & touch | Swipe & touch |
| Sensing: temperature | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ |
| Sensing: humidity | − | ☒ | ☒ | ☒ | ☒ | − | ☒ | ☒ | ☒ | − | ☒ | ☒ |
| Sensing: CO₂ | − | − | − | − | − | − | − | ☒ | ☒ | − | − | ☒ |
| Temperature setpoint | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ |
| Override | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ |
| Fan | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ | ☒ |
| Customizable parameters | ☒ | ☒ | ☒ | ☒ | ☒ (limited) | − | − | − | − | ☒ | ☒ | ☒ |
| VAV balancing | ☒ | ☒ | ☒ | ☒ | ☒ (limited) | − | − | − | − | − | − | − |
| Schedule access | ☒ | ☒ | ☒ | ☒ | − | − | − | − | − | − | − | − |
| User management levels | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 |
| Communication protocol | Sylk™ | Sylk™ | Sylk™ | Sylk™ | Sylk™ | Sylk™ | Sylk™ | Sylk™ | Sylk™ | BACnet™ MS/TP / Modbus™ RTU | BACnet™ MS/TP / Modbus™ RTU | BACnet™ MS/TP / Modbus™ RTU |
| Alarms | − | − | − | − | − | − | − | − | − | ☒ | ☒ | ☒ |
| Firmware updates | ☒ | ☒ | − | − | − | ☒ | ☒ | ☒ | − | with HON Tools | with HON Tools | with HON Tools |
Symbols: ☒ = supported, − = not supported or not applicable.