VRN2DRPXG101
Details
Details
VRN2DRPXG101 Pressure Independent Control Valve and Actuator, 1-1/4 in. NPT, 30 GPM, MS3103J1023
Holds flow at the 30 GPM setting across a 5 to 50 psi differential.
Springs the valve open on power loss.
Connects to a Sylk-enabled controller over the Sylk bus.
Needs 24 VAC power.
Key Features
- 5 to 50 psi differential range
- 100 psid close-off
Product Specifications
| Manufacturer | Honeywell |
|---|---|
| Model | VRN2DRPXG101 |
| Product type | Pressure independent control valve (2-way ball valve with differential pressure regulator), factory-mounted actuator |
| Size | 1-1/4 in. (DN32) |
| Connection | Female NPT |
| Maximum flow | 30 GPM |
| Differential pressure range | 5 to 50 psi |
| Head loss | 5 psi |
| Flow characteristic | Equal percentage (flow control insert) |
| Flow control accuracy | +/-5% |
| Close-off | 100 psid |
| Body | Forged brass (ASTM B283) |
| Ball and stem | Nickel-chrome plated brass |
| Seals | EPDM O-ring stem seals with Teflon bearings; reinforced Teflon ball seals with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Body pressure rating | 360 psi (2500 kPa) at 250 deg F (121 deg C) |
| Medium | Water or glycol solutions up to 50%; not for combustible gases, oil, or steam |
| Medium temperature | -22 to 250 deg F (-30 to 121 deg C) |
| Test port | Upstream test port for venting or a pressure gauge |
| Replacement stem | 5112-20 (brass), 5112-23 (SS) |
| Replacement regulator | 8615-102 |
| Actuator mounting | MN/MS direct coupled actuator bracket |
| Actuator | MS3103J1023 (Sylk-enabled, 24 V, fail safe) |
| Fail action | Spring return, fail safe |
| Torque | 27 lb-in (3 Nm) |
| Fail position | Fails open |
| Cable | 3 ft cable, standard |
| Enclosure | NEMA 2 |
| Weight | 8.8 lb |
| Honeywell form | 38-00032-03; 38-00005EFS |