VRN2CNPXC000
Details
Details
VRN2CNPXC000 Pressure Independent Control Valve and Actuator, 1 in. NPT, 15 GPM, MN6105A1201
Holds flow at the 15 GPM setting across a 4 to 50 psi differential.
Holds its position on power loss.
Takes a floating or two-position (SPDT) signal.
Needs 24 VAC/DC power.
Key Features
- 4 to 50 psi differential range
- 100 psid close-off
- End switches
Product Specifications
| Manufacturer | Honeywell |
|---|---|
| Model | VRN2CNPXC000 |
| Product type | Pressure independent control valve (2-way ball valve with differential pressure regulator), factory-mounted actuator |
| Size | 1 in. (DN25) |
| Connection | Female NPT |
| Maximum flow | 15 GPM |
| Differential pressure range | 4 to 50 psi |
| Head loss | 4 psi |
| Flow characteristic | Equal percentage (flow control insert) |
| Flow control accuracy | +/-5% |
| Close-off | 100 psid |
| Body | Forged brass (ASTM B283) |
| Ball and stem | Nickel-chrome plated brass |
| Seals | EPDM O-ring stem seals with Teflon bearings; reinforced Teflon ball seals with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Body pressure rating | 360 psi (2500 kPa) at 250 deg F (121 deg C) |
| Medium | Water or glycol solutions up to 50%; not for combustible gases, oil, or steam |
| Medium temperature | -22 to 250 deg F (-30 to 121 deg C) |
| Test port | Upstream test port for venting or a pressure gauge |
| Replacement stem | 5112-19 (brass), 5112-22 (SS) |
| Replacement regulator | 8615-101 |
| Actuator mounting | MN/MS direct coupled actuator bracket |
| Actuator | MN6105A1201 (Floating, two-position (SPDT), 24 V, fail in place, with end switches) |
| Fail action | Non-spring return, fail in place |
| Torque | 44 lb-in (5 Nm) |
| Control signal | Floating or two-position (SPDT); rotation direction and service/off switch |
| Timing | 90 sec drive |
| Actuator supply power | 24 VAC/VDC -15%/+20%, 50/60 Hz |
| Actuator power consumption | 5 VA / 2 W |
| End switches | 2 internal SPDT end switches, Class II circuits only, triggering at 5 and 85 deg |
| Cable | 3 ft cable, standard |
| Enclosure | NEMA 2 |
| Weight | 3.5 lb |
| Honeywell form | 38-00032-03; 38-00005EFS |