VG1875AE
Details
Details
VG1875AE 1/2 in. Sweat 3-Way Ball Valve, 1.9 Cv, Stainless Steel Trim, Less Actuator
Ships as a valve only; order the actuator separately.
Mounts directly to VA9104, VA9300, and VA9203 actuators; M9300 and M9203 actuators need a linkage kit.
Handles hot or chilled water up to 50% glycol, -22 to 212 deg F. Not for steam.
Port A must be piped to the coil.
Key Features
- Cv: 1.9 coil port / 1.2 bypass port
- Close-off: 200 psi
- Ball and stem: 300 Series stainless steel
Product Specifications
| Manufacturer | Johnson Controls |
|---|---|
| Model | VG1875AE |
| Valve | VG1875AE forged brass ball valve, 3-way mixing |
| Size and connection | 1/2 in. (DN15) sweat |
| Cv | 1.9 port A (coil) / 1.2 port B (bypass) |
| Flow characteristic | Equal percentage in-line port (coil), linear angle port (bypass); characterizing disk |
| Close-off pressure | 200 psi (with listed actuators) |
| Service | Hot water, chilled water, 50/50 glycol |
| Fluid temperature (as assembled) | -22 to 212 deg F (-30 to 100 deg C) with VA9104, VA9300, VA9203, or VA9208 actuators; not rated for steam |
| Fluid temperature with M9000-561 thermal barrier | -22 to 284 deg F water |
| Leakage, bypass port | 1% of maximum flow |
| Ball and stem | 300 Series stainless steel |
| Body pressure rating | 300 psig |
| Body | Forged brass |
| Seats | Graphite-reinforced PTFE with EPDM O-ring backing |
| Stem seals | EPDM double O-rings |
| Characterizing disk | AMODEL AS-1145HS polyphthalamide resin |
| Maximum recommended operating pressure drop | 50 psid (340 kPa) |
| Rangeability | Greater than 500:1 |
| Leakage | 0.01% of maximum flow per ANSI/FCI 70-2, Class 4 |
| Direct-mount actuators | VA9104, VA9300, VA9203 Series (mounting hardware included with actuator) |
| Linkage kits for M9000 actuators | M9310-500 (M9300); M9000-560 (M9203); M9104 not available |
| Weather shield (order separately) | M9000-342 |