VG1245AL+923GGA
Details
Details
VG1245AL+923GGA 1/2 in. NPT 2-Way Ball Valve, 7.4 Cv, with VA9203-GGA-2Z Spring Return Actuator, Normally Open, Proportional, 24 VAC/DC
Opens on power loss by spring return in about 16 seconds.
Accepts 0(2)-10 VDC directly, or 0(4)-20 mA with a field-supplied 500 ohm resistor, and returns a 0(2)-10 VDC position signal.
Handles hot or chilled water up to 50% glycol, -22 to 212 deg F. Not for steam unless the M9000-561 thermal barrier is added.
Key Features
- Cv: 7.4 (characterizing disk)
- Close-off: 200 psi
- Ball and stem: 300 Series stainless steel
- Torque: 27 lb-in
Product Specifications
| Manufacturer | Johnson Controls |
|---|---|
| Model | VG1245AL923GGA (VG1245AL+923GGA) |
| Valve | VG1245AL forged brass ball valve, 2-way |
| Size and connection | 1/2 in. (DN15) NPT |
| Cv | 7.4 (Kvs 6.3) |
| Flow characteristic | Equal percentage (characterizing disk) |
| Close-off pressure | 200 psi |
| Fail position | Spring opens (normally open) |
| Service | Hot water, chilled water, 50/50 glycol |
| Fluid temperature (as assembled) | -22 to 212 deg F (-30 to 100 deg C); not rated for steam |
| Fluid temperature with M9000-561 thermal barrier | -22 to 284 deg F water; 15 psig saturated steam at 250 deg F |
| Ball and stem | 300 Series stainless steel |
| Body pressure rating | 580 psig (PN40); 464 psig at 284 deg F |
| Body | Forged brass |
| Seats | Graphite-reinforced PTFE with EPDM O-ring backing |
| Stem seals | EPDM double O-rings |
| Characterizing disk | AMODEL AS-1145HS polyphthalamide resin |
| Maximum recommended operating pressure drop | 50 psid (340 kPa) |
| Rangeability | Greater than 500:1 |
| Leakage | 0.01% of maximum flow per ANSI/FCI 70-2, Class 4 |
| Actuator | VA9203-GGA-2Z electric spring return, direct mount |
| Power | 24 VAC (19.2-28.8 VAC) 50/60 Hz, 4.7 VA running, 2.7 VA holding; or 24 VDC (21.6-28.8 VDC), 1.8 W running, 1 W holding; Class 2 |
| Minimum transformer size | 6 VA per actuator |
| Control signal | Factory set 0-10 VDC, CW rotation on signal increase; selectable 0(2)-10 VDC or 0(4)-20 mA with field-furnished 500 ohm resistor; switch selectable DA/RA |
| Input impedance | Voltage 100,000 ohm; current 500 ohm |
| Feedback signal | 0(2)-10 VDC, 0.5 mA at 10 V maximum |
| Rated torque | 27 lb-in (3 Nm) running and spring returning |
| Rotation | 95 deg maximum |
| Running time | 90 seconds constant for 90 deg |
| Spring return time | 12 to 17 seconds at room temperature; 16 seconds nominal at full load; 22 seconds maximum at -22 deg F |
| Life | 60,000 full stroke cycles; 1,500,000 repositions |
| Electrical connections | 120 in. (3.05 m) UL 444 Type CMP plenum cable, 19 AWG |
| Conduit connections | Integral 1/2 in. threaded conduit connectors |
| Actuator ambient operating | -22 to 140 deg F (-30 to 60 deg C), 90% RH maximum, noncondensing |
| Actuator enclosure | NEMA 2 (IP54) |
| Actuator compliance | UL Listed (CCN XAPX, File E27734); plenum rated UL 2043; cUL; CE; RCM |