VBN2DKPL3000
Details
Details
VBN2DKPL3000 2-Way Control Ball Valve and Actuator, 1-1/4 in. NPT, Cv 14.9, MVN713
Holds its position on power loss.
Accepts a 0-10V or 2-10V control signal.
Needs 24 VAC/DC power.
Key Features
- Cv 14.9
- 100 psid close-off
Product Specifications
| Manufacturer | Honeywell |
|---|---|
| Model | VBN2DKPL3000 |
| Product type | 2-way control ball valve with factory-mounted actuator |
| Size | 1-1/4 in. (DN32) |
| Connection | Female NPT |
| Pattern | 2-way, straight-through flow |
| Cv | 14.9 |
| Flow characteristic | Equal percentage (flow control insert) |
| Close-off | 100 psid |
| Leakage | ANSI Class IV (0.01% of Cv) |
| Body | Forged brass |
| Ball and stem | Nickel-chrome plated brass |
| Seals | Teflon seals with EPDM O-rings |
| Body pressure rating | 360 psi (2482 kPa) at 250 deg F (121 deg C) |
| Medium | Chilled or hot water with up to 50% glycol; not for steam or fuels |
| Medium temperature | -22 to 250 deg F (-30 to 121 deg C) |
| Flow control insert | Noryl |
| Replacement stem | 5112-20 (brass), 5112-23 (SS) |
| Actuator mounting | Low profile base |
| Actuator | MVN713L0000 (0(2)-10 VDC modulating, 24 V, fail in place) |
| Fail action | Non-spring return, fail in place |
| Torque | 27 lb-in (3 Nm) |
| Control signal | 0(2)-10 VDC modulating, direct or reverse (DIP switch: 2-10V, 0-10V, 10-2V, 10-0V); 4-20mA with a 500 ohm, 1/2 W minimum series resistor |
| Timing | 90 sec (+/-10%) |
| Actuator supply power | 24 VAC +20%, -15%, or 24 VDC; 50/60 Hz |
| Actuator power consumption | 5 VA |
| Enclosure | NEMA 2; IP40 |
| Weight | 2.0 lb |
| Honeywell form | 63-2648-09; 63-4378-09; 62-2025EFS |