HATXRC48D2GPES
Details
Details
Room Temp Transmitter, 0-5V, 32 to 122 deg F, 0-10k Setpoint, Override, 1/3 DIN RTD
Needs the HHTA hand-held adapter to use the communication jack.
Needs 10-35 VDC or 10-32 VAC power.
Key Features
- Sensor accuracy: +/-0.18 deg F
- Override: 50 mA @ 12 VDC
Product Specifications
| Manufacturer | Greystone |
|---|---|
| Model | HATXRC48D2GPES |
| Sensor | 1000 ohm platinum RTD, IEC 751, 385 alpha, thin film, 1/3 DIN |
| Sensor accuracy | +/-0.18 deg F (+/-0.1 deg C) @ 32 deg F (0 deg C) |
| Output | 0-5 VDC (factory configured) |
| Scaled range | 32 to 122 deg F (0 to 50 deg C) |
| Transmitter accuracy | +/-0.1% of span, including linearity |
| Internal adjustment | Zero and span pots |
| Power supply | 10-35 VDC or 10-32 VAC |
| Maximum current | 5 mA nominal |
| Maximum output | Limited to <5.5 VDC |
| Input voltage effect | Negligible over specified operating range |
| RFI rejection | Good RFI rejection of normal frequencies |
| Protection circuitry | Reverse voltage protected and output limited |
| Setpoint | Front panel slide pot, 2-wire resistance output, 0-10k ohm |
| Override | Front panel momentary pushbutton, NO, SPST, 50 mA @ 12 VDC |
| Status LED | Green; input active high, low, or 2-wire, 5 V current limited; 5 VDC LED supply |
| Communication jack | Molex 4-pin header to 4-pin terminal block; requires HHTA hand-held adapter |
| Operating conditions | 32 to 140 deg F (0 to 60 deg C), 0 to 95% RH, non-condensing |
| Enclosure | White ABS, IP30 (NEMA 1) |
| Enclosure dimensions | 3.3 in. W x 4.6 in. H x 1.15 in. D (84 x 117 x 29 mm) |
| Wiring connections | Screw terminal block (14 to 22 AWG) |
| Mounting | Single-gang electrical box or directly to the wall; insulating foam backing |
| Country of origin | Canada |