HATXOBE18XA001
Details
Details
Outside Air Temp Transmitter with Sun Shield, 4-20mA, 32 to 95 deg F, Class A RTD
Runs on 15-35 VDC loop power or 22-28 VAC.
Key Features
- Sensor accuracy: +/-0.27 deg F
- Enclosure: Polycarbonate, UL94-V0, IP65 (NEMA 4X), with cable gland fitting
Product Specifications
| Manufacturer | Greystone |
|---|---|
| Model | HATXOBE18XA001 |
| Sensor | 1000 ohm platinum RTD, IEC 751, 385 alpha, thin film, Class A |
| Sensor accuracy | +/-0.27 deg F (+/-0.15 deg C) @ 32 deg F (0 deg C) |
| Wire | FT-4, 22 AWG |
| Probe material | 304 series stainless steel |
| Probe diameter | 0.236 in. (6 mm) |
| Sun/wind shield | White polycarbonate, vented |
| Mounting | Outside wall, north facing, under the eaves out of direct sunlight |
| Conduit entry | 0.85 in. hole |
| Output | 4-20mA current loop (factory configured) |
| Scaled range | 32 to 95 deg F (0 to 35 deg C) |
| Transmitter accuracy | +/-0.1% of span, including linearity |
| Calibration | Factory calibrated; field adjustment voids the warranty |
| Output drive @ 24 VDC | 600 ohm maximum load (current output) |
| Input voltage effect | Negligible over specified operating range |
| Protection circuitry | Reverse voltage protected and output limited |
| Ambient operating range | -40 to 122 deg F (-40 to 50 deg C), 0 to 95% RH non-condensing |
| Enclosure | Polycarbonate, UL94-V0, IP65 (NEMA 4X), with cable gland fitting |
| Enclosure dimensions | 3.25 x 2.75 x 2.05 in. (82.5 x 69.8 x 52.0 mm) |
| Termination | Terminal block (14 to 22 AWG) |
| Protection class | III |
| Power supply | 15-35 VDC (loop-powered) or 22-28 VAC Limited Energy, <15 W |
| Consumption | 20 mA |
| EU conformity | CE |
| Certification | UL 60730 and CSA E60730 |
| Purpose of control | Operating control |
| UL enclosure type | Type 3R, raintight |
| Type of action | Type 1 |
| Impulse voltage | 330 V |
| Pollution degree | 4 |
| Country of origin | Canada |