HATSPC39PE
Details
Details
Room Temp Sensor with LCD Setpoint, 10k Type 2 Thermistor, +/-0.09 deg F, 0-10k Setpoint Output and Communication Jack
Needs 24 VAC/DC power.
Needs the HHTA hand-held adapter to use the communication jack.
Mounts on a single-gang box or directly on the wall.
Key Features
- Setpoint output: 0 to 10,000 ohm, linear resistance, +/-10 steps from up/down pushbuttons
- Setpoint range: 60 to 80 deg F in 1 deg F steps (16 to 26 deg C in 0.5 deg C steps)
Product Specifications
| Manufacturer | Greystone |
|---|---|
| Model | HATSPC39PE |
| Sensor | 10,000 ohm Type 2 NTC thermistor, +/-0.09 deg F (+/-0.05 deg C) |
| Sensor accuracy | +/-0.09 deg F (+/-0.05 deg C), 32 to 158 deg F (0 to 70 deg C) |
| Setpoint output | 0 to 10,000 ohm, linear resistance, +/-10 steps from up/down pushbuttons |
| Setpoint range | 60 to 80 deg F in 1 deg F steps (16 to 26 deg C in 0.5 deg C steps) |
| Setpoint midpoint | Programmable, 68 to 73 deg F (20 to 23 deg C) |
| Setpoint step on LCD | 1.0 deg F (0.5 deg C) |
| Setpoint action | Programmable, direct or reverse acting |
| LCD | Backlit, 32.0 to 95.0 deg F or 0.0 to 35.0 deg C, jumper selectable; shows room temp, setpoint on demand, and occupancy |
| LCD resolution | 0.5 deg F/C |
| LCD size | 1.5 x 0.65 in. (38.1 x 16.5 mm), 0.45 in. (11.43 mm) digits |
| LCD symbols | deg C, deg F, OCC |
| LCD backlight | Enable or disable by jumper |
| Occupied input | Digital input, 0-5 VDC, active low; turns on the OCC segment of the LCD |
| Communication jack | 4-pin header; requires the HHTA hand-held adapter |
| Power supply | 24 VAC/DC +/-10% (non-isolated half-wave rectified) |
| Consumption | 20 mA max |
| Ambient operating range | 32 to 122 deg F (0 to 50 deg C), 0 to 95% RH non-condensing |
| Enclosure | White ABS, IP30 (NEMA 1) |
| Enclosure dimensions | 3.3 x 4.7 x 1.15 in. (84 x 119 x 29 mm) |
| Mounting | Single-gang electrical box or wall; insulating foam on the back |
| Wiring connections | Screw terminal block (14 to 22 AWG) |
| Country of origin | Canada |