HATSAPE18B
Details
Details
Duct/Immersion Temp Sensor, 1k Plat RTD, Class A, 4 in. Probe
Mounts through the side of a duct, or in a pipe with a T2 Series thermowell sold separately.
Needs the T1AP-ADAPTER to fit a T1 Series thermowell.
Key Features
- Probe sensing range: -40 to 212 deg F (-40 to 100 deg C)
- Termination: Terminal block, 2 or 3 wire
Product Specifications
| Manufacturer | Greystone |
|---|---|
| Model | HATSAPE18B |
| Sensor | 1000 ohm platinum RTD, 3-wire, IEC 751, 385 alpha, thin film, Class A |
| Sensor accuracy | +/-0.27 deg F (+/-0.15 deg C) @ 32 deg F (0 deg C) |
| Accuracy note | Accuracy is for the sensing element before assembly and may not be reflected in the complete assembly; profile each assembly for lead wire and attachment method |
| Probe sensing range | -40 to 212 deg F (-40 to 100 deg C) |
| Ambient operating range | -40 to 140 deg F (-40 to 60 deg C), 5 to 95% RH non-condensing |
| Wire material | FT-4, 22 AWG, 3-wire |
| Probe material | 304 series stainless steel |
| Probe diameter | 0.236 in. (6 mm) |
| Probe length | 4 in. (100 mm) |
| Enclosure | ABS, hinged and gasketed cover, UL94-V0, IP65 (NEMA 4X), with terminal block |
| Termination | Terminal block, 2 or 3 wire |
| Included fittings | Thread adapter (1/2 in. NPT to M16) and cable gland fitting |
| Conduit connection | 1/2 in. NPT |
| Enclosure dimensions | 3.25 x 2.75 x 2.05 in. (82.5 x 69.8 x 52.0 mm) |
| Mounting | Through the side of a duct, or in a thermowell for immersion |
| Thermowell | Not included; immersion needs a T2 Series thermowell, or a T1 Series thermowell with the T1AP-ADAPTER |
| Protection class | III |
| Power source (UL) | SELV, limited energy (<15 W) |
| EU conformity | CE |
| Certification | UL 60730 and CSA E60730 |
| UL 2043 / CSA / ULC S142 | Suitable for use in air handling spaces per NEC Section 300.22(C) |
| Purpose of control | Temperature sensor |
| Type of action | Type 1 |
| Impulse voltage | 330V |
| Pollution degree | 2 |
| Country of origin | Canada |