F650-300SHP+GW10
Details
Details
F650-300SHP+GW10 2 in. 2-Way High Performance Butterfly Valve, ANSI Class 300, with GW10 Gear Operator
Operates by hand through a worm gear; needs no power or wiring.
Handles hot or chilled water up to 60% glycol, and steam to 50 psi.
Mounts between Class 250/300 flanges; flange gaskets and bolts are not included.
Holds full pressure at the end of a line without a downstream flange.
Key Features
- Cv: 102
- Media temperature range: -20 to 400 deg F (-30 to 204 deg C)
Product Specifications
| Manufacturer | Belimo |
|---|---|
| Model | F650300SHPGW10 (F650-300SHP+GW10) |
| Valve | F650-300SHP |
| Valve size | 2 in. (DN 50) |
| Service | chilled, hot water, 60% glycol, steam to 50 psi |
| Flow characteristic | modified equal percentage, unidirectional |
| Controllable flow range | 82 deg |
| Type of end fitting | ANSI 300 flanges |
| Body | carbon steel full lug |
| Disc | 316 stainless steel |
| Seat | RPTFE |
| Shaft | 17-4 PH stainless |
| Gland seal | PTFE |
| Bushings | glass backed PTFE |
| Media temperature range | -20 to 400 deg F (-30 to 204 deg C) |
| Body pressure rating | ANSI Class 300 |
| Rangeability | 100:1 (for 30 deg to 70 deg range) |
| Maximum velocity | 32 FPS |
| Leakage | bubble tight |
| Cv | 102 |
| Cv at 60 deg | 56 |
| Cv at 10, 20, 30, 40, 50, 60, 70, 80 deg | 1.50, 6.10, 14, 26, 39, 56, 77, 99 |
| Dimension A (face to face) | 1.75 in. |
| Bolt hole circle | 5.00 in. |
| Number of bolt holes | 8 |
| Lug bolt | 5/8-11 UNC |
| Flanges | lugs tapped for use between ANSI Class 250/300 flanges conforming to ANSI B16.5 |
| Dead end service | larger retainer ring set screws allow end-of-line installation without a downstream flange, either flow direction, at full pressure |
| Insulation | long stem allows for 2 in. insulation minimum |
| Face-to-face standard | API 609 and MSS-SP-68 |
| Flange gaskets | 2 required, not provided with valve |
| Flange bolts | not included |
| Gear operator | GW10 worm gear operator with handwheel, manual |
| Gear operator shaft size (A) | 5/8 in. |
| Gear operator torque (B) | less than 840 lb-in |