10BASE-T1L-ADAPT-0

Product Information

IP-T1L single pair media adapter that allows converting 10BASE-T traffic to 10BASE-T1L (no power supply)

• The Honeywell 10BASE-T1L media adapter is a converter that allows migrating a 10BASE-T network to 10BASE-T1L. This enables the easy deployment of devices with an Ethernet network using a single twisted pair connection.

• The 10BASE-T1L protocol allows devices to communicate on low-cost single twisted pair cable within an IP network. Using existing or new 2-wire cables saves installation costs. Through the Honeywell T1L media adapter, T1L networks can be connected to site Ethernet IP or LAN by converting one media type to another. An RJ45 connector connects the 10BASE-T network cable to an Ethernet, and a three-way screw terminal connects the downstream T1L devices with the twisted pair cable. The two ports exchange data packets in both directions. The adapter does not require an IP or MAC address and works out of the box with no configuration.

Product Features and Highlights

• Plug and play with zero setup.

• Two models available: one with power supply (110-230 VAC) and another without power supply.

• Can operate from a separate power supply ranging from 5 to 24 VDC.

• Operates at 10 Mbps.

• Wall mount, enclosure, or panel mount or DIN rail mount*.

Note: * Requires a 1427DINCLIP or similar. Must be purchased from a third-party vendor.