01APS-504

SKU: 01APS504
$49.50

Call for Availability - (510) 636-7900

Details

Details

01APS-504 Differential Pressure Switch, 2.00 to 10.00 in. WC

Adjustable setpoint with automatic reset.

Dry media only; not for combustible or aggressive gases.

Key Features

  • Switching differential: 150 Pa
  • Contact rating: max. 1.0 A @ 250 VAC

Product Specifications

ManufacturerBelimo
Model01APS504 (01APS-504)
Measuring range2.00 to 10.00 in. WC (500 to 2500 Pa)
Repeating accuracy+/-1%, min. +/-0.02 in. WC (5 Pa)
Switching differential150 Pa
Burst pressure40 in. WC (10 kPa)
Contact formSPDT (COM, NO, NC)
Electrical connectionTerminals for wire 0.5 to 1.5 mm2
Cable entryCable gland with strain relief dia. 6 to 8 mm (1/2 in. NPT conduit adapter included)
ApplicationAir
Contact ratingmax. 1.0 A @ 250 VAC
Service lifemin. 1,000,000 switching operations
Measured valuesDifferential pressure
Measuring fluidair, non-combustible and non-aggressive gases
Long term stability<=+/-15% deviation over 250,000 operations/ cycles acc. EN1854
Degree of protection IEC/ENIP54
Degree of protection NEMA/ULNEMA 13
Low voltage directiveCE according to 2014/35/EU
EU ConformityCE Marking
Certification IEC/ENIEC/EN 60730-1
Quality StandardISO 9001
UL ApprovalETL listed, UL508, CSA C22.2 No.14
Ambient humidityMax. 95% RH, non-condensing
Ambient temperature-4 to 140 deg F (-20 to 60 deg C)
Fluid temperature-4 to 140 deg F (-20 to 60 deg C)
Storage temperature-40 to 185 deg F (-40 to 85 deg C)
HousingBottom Part: PA 6.6; Top Cover: PS
Permissible installation orientationVertical recommended, pressure ports down; switching point approx. 20 Pa higher when horizontal; not upside down
Parts includedPVC tube 2 m, 2x duct connector (plastic), screws, 1/2 in. NPT conduit adapter