ZG-JSLA+AMX24-3-T
Details
Details
ZG-JSLA+AMX24-3-T Jackshaft Linkage with 180 lb-in Non-Spring Return Actuator, 24 VAC/DC, Floating, Screw Terminals
On/off or floating control. Holds position on power loss.
The actuator is factory mounted on the linkage, vertical position only.
Torque at the jackshaft is lower than the actuator's rating; check the damper torque requirement before ordering.
Key Features
- Linkage jackshaft diameter: 1/2 to 3/4 in. with clamp insert; up to 1.05 in. with insert removed
- Electrical Connection: Screw terminal (for 26 to 14 AWG wire)
Product Specifications
| Manufacturer | Belimo |
|---|---|
| Model | ZGJSLAAMX243T (ZG-JSLA+AMX24-3-T) |
| Linkage | ZG-JSLA |
| Actuator | AMX24-3-T |
| Linkage jackshaft diameter | 1/2 to 3/4 in. with clamp insert; up to 1.05 in. with insert removed |
| Linkage built-in shaft | 3/4 in. diameter, steel |
| Linkage actuator mounting | factory mounted, vertical position only |
| Nominal voltage | AC/DC 24 V |
| Nominal voltage frequency | 50/60 Hz |
| Nominal voltage range | AC 19.2 to 28.8 V / DC 21.6 to 28.8 V |
| Power consumption in operation | 2.5 W |
| Power consumption in rest position | 0.2 W |
| Transformer sizing | 5.5 VA |
| Electrical Connection | Screw terminal (for 26 to 14 AWG wire) |
| Overload Protection | electronic throughout 0 to 95 deg rotation |
| Torque motor | 180 lb-in (20 Nm) |
| Direction of motion motor | selectable with switch 0/1 |
| Manual override | external push button |
| Angle of rotation | Max. 95 deg |
| Angle of rotation note | adjustable with mechanical stop |
| Running Time (Motor) | 90 s / 90 deg |
| Running time motor note | constant, independent of load |
| Running time motor variable | 90 or 150 s |
| Sound power level, motor | 45 dB(A) |
| Position indication | Mechanical |
| Power source UL | Class 2 Supply |
| Degree of protection NEMA/UL | NEMA 1 |
| Housing | UL Enclosure Type 1 |
| Agency Listing | cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02 CE acc. to 2014/30/EU and 2014/35/EU |
| Quality Standard | ISO 9001 |
| UL 2043 Compliant | Suitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMC |
| Ambient humidity | Max. 95% RH, non-condensing |
| Ambient temperature | -22 to 122 deg F (-30 to 50 deg C) |
| Storage temperature | -40 to 176 deg F (-40 to 80 deg C) |
| Servicing | maintenance-free |
| Weight | 1.9 lb (0.86 kg) |
| Housing material | UL94-5VA |
| Linkage torque note | torque is reduced through the linkage; verify application requirements |
| Linkage mounting position | 90 to 180 deg |
| Linkage housing material | galvanized steel |
| Linkage stem | steel |
| Linkage bearing | GF Delrin |
| Linkage frame, plate, base | galvanized steel |
| Linkage ambient humidity | Max. 95% RH, non-condensing |
| Linkage ambient temperature | -22 to 122 deg F (-30 to 50 deg C) |
| Linkage storage temperature | -40 to 176 deg F (-40 to 80 deg C) |
| Linkage servicing | maintenance-free |
| Linkage quality standard | ISO 9001 |
| Linkage weight | 5.2 lb (2.4 kg) |