VBN2F2SX6200
Details
Details
VBN2F2SX6200 2-Way Control Ball Valve and Actuator, 2 in. NPT, Cv 266, MS7505A2030
Springs the valve closed on power loss.
Accepts 0-10V or 2-10V modulating, floating, or two-position control.
Needs 24 VAC/DC power.
Key Features
- Cv 266
- 100 psid close-off
Product Specifications
| Manufacturer | Honeywell |
|---|---|
| Model | VBN2F2SX6200 |
| Product type | 2-way control ball valve with factory-mounted actuator |
| Size | 2 in. (DN50) |
| Connection | Female NPT |
| Pattern | 2-way, straight-through flow |
| Cv | 266 (full port, no flow control insert) |
| Flow characteristic | Linear (full port) |
| Close-off | 100 psid |
| Leakage | ANSI Class IV (0.01% of Cv) |
| Body | Forged brass |
| Ball and stem | 316 stainless steel |
| Seals | Teflon seals with EPDM O-rings |
| Body pressure rating | 360 psi (2482 kPa) at 250 deg F (121 deg C) |
| Medium | Chilled or hot water with up to 50% glycol; not for steam or fuels |
| Medium temperature | -22 to 250 deg F (-30 to 121 deg C) |
| Replacement stem | 5112-21 (brass), 5112-24 (SS) |
| Actuator mounting | MN/MS direct coupled actuator bracket |
| Actuator | MS7505A2030 (Universal: 0(2)-10 VDC modulating, floating, or two-position (SPDT), 24 V, fail safe) |
| Fail action | Spring return, fail safe |
| Torque | 44 lb-in (5 Nm) holding, driving, and spring return; stall maximum 106 lb-in (12 Nm) |
| Control signal | Floating or modulating 0/2-10 VDC; 4-20mA with a 500 ohm resistor; input impedance 95 kOhm minimum |
| Timing | 90 sec drive |
| Actuator supply power | 24 VAC/DC +/-20%, 50/60 Hz; 24 VDC +/-10% |
| Actuator power consumption | 6/3 VA driving |
| Fail position | Fails closed |
| Cable | 3 ft cable, standard |
| Enclosure | NEMA 2 |
| Weight | 8.5 lb |
| Honeywell form | 63-2648-09; 63-4378-09; 62-2025EFS |