A/1K-2W-I-6"-PB
Details
Details
Immersion Temp Sensor, 1k Plat RTD, 2-Wire, 6 in. Welded Thermowell, Plastic Box
Includes a welded 304 SS thermowell with a 1/2 in. NPT male process connection.
Suits tanks and low or no flow only: welded wells are not intended for moving water or high pressure service.
Key Features
- Sensor operating range: -40 to 392 deg F (-40 to 200 deg C)
- Enclosure: ABS plastic (PB), UL94-5VB, plenum rated, -22 to 212 deg F (-30 to 100 deg C)
Product Specifications
| Manufacturer | ACI |
|---|---|
| Model | A/1K-2W-I-6"-PB |
| ACI item number | 124201 |
| Sensor type | Platinum RTD, PTC (positive temperature coefficient) |
| Sensor output | 1,000 ohm nominal @ 32 deg F (0 deg C) |
| Number of wires | Two (not polarity sensitive) |
| Accuracy | +/-0.06% Class A (+/- deg C = 0.15 + 0.002 x |t|); +/-0.414 deg F (+/-0.23 deg C) @ -40 deg F (-40 deg C); +/-0.27 deg F (+/-0.15 deg C) @ 32 deg F (0 deg C); +/-1 deg F (+/-0.55 deg C) @ 392 deg F (200 deg C) |
| Standard | DIN EN 60751 (IEC 751), 3850 ppm/deg C |
| Stability | +/-0.03% after 1000 hours @ 572 deg F (300 deg C) |
| Response time | 8 seconds nominal (63% step change) |
| Self-heating | 4 mW/deg C (still air), 3 mA max |
| Number of sensing points | One |
| Sensor operating range | -40 to 392 deg F (-40 to 200 deg C) |
| Storage range | -40 to 185 deg F (-40 to 85 deg C) |
| Operating humidity | 10 to 95% RH, non-condensing |
| Probe | 304 SS, 0.25 in. (6.35 mm) diameter |
| Insertion length | 6 in. (152.4 mm) |
| Thermowell | Welded (two-part fabricated) 304 SS, included; 0.26 in. bore, 1/2 in. NPS female instrument thread |
| Process connection | 1/2 in. NPT male |
| Thermowell pressure rating | 982 psi @ 70 deg F, 820 psi @ 200 deg F, 675 psi @ 400 deg F, 604 psi @ 600 deg F, 550 psi @ 800 deg F, 510 psi @ 1000 deg F, 290 psi @ 1200 deg F |
| Max fluid velocity | 20 ft/s air, gas or steam; 10 ft/s water (6 in. welded thermowell) |
| Enclosure | ABS plastic (PB), UL94-5VB, plenum rated, -22 to 212 deg F (-30 to 100 deg C) |
| Enclosure fitting | Polyamide 66 (nylon 66), UL94-HB, 1/2 in. NPS male thread |
| Foam pad | Neoprene/EPDM/SBR polymer, UL94-HBF, FMVSS-302, MIL-R-6130C |
| Lead wires | 14 in. (35.6 cm), 22 AWG, etched PTFE (Teflon) insulation, Mil Spec 16878/4 Type E, silver-plated copper |
| Product weight | 0.64 lb (0.29 kg) |
| NIST certificate | Not included |
| Agency approvals | CE, UKCA, RoHS2, WEEE |
| Thermowell service | Tank or low to no flow; not for moving water or high pressure service (use a machined well) |
